Versjon 1.62 kan lastes ned fra:

Fra readme-filen:
-. Same transponder > recording one channel, another channel can be watched is possible (at the moment You can watch only FTA channel)
-. Many of DVB-subtitle problems were fixed. (Sync, Speed, Stability...)
-. "PVR Ready" message box will pop-up when the HDD is available after finishing HDD test.
-. If you turn on (main switch rear side the receiver then press "MENU" + "UP" button on the front panel, "factory-reset" will be executed, OK with "SELECT" button
This function might be useful when the receiver would not turn on.
-. If you press "V-Format" key, list menu will popup
-. On standby, USB HDD will be powered off

-. Combo models > DVB-T/DTT/TDT scan mode > Frequencies can edit
For example > in Italy DTT network some frequencies must modified
6 Freq. 184,5 is in Italy > E Freq. 186,0
7 Freq. 191,5 is in Italy > F Freq. 194,5
8 Freq. 198,5 is in Italy > G Freq. 203,5

-. Combo plus model > added File Manager menu. File transfer via network with stb daemon pc tool.
-. Combo plus model > Tuner software driver was updated.