Hei,jeg har kjøpt en BG808s fra 1998 med Lido.Lido er en scaler ikke sant?kan jeg bruke det i min BD808s?er det ett kort eller noe?
Eller blir det dårligere med Lido?
Viser resultater 1 til 5 av 5
09-30-2005, 13:29 #1
09-30-2005, 15:09 #2
: What is the Limo Pro option on new Barco projectors?
A: Limo Pro is Barco's proprietary line multiplier / internal scaler. It features 3:2 pull down for film based NTSC video and 2:2 pull down for film based PAL video. Limo Pro operates on all incoming video formats including Composite, S-Video, Component and RGB. Depending on the model of projector it offers line double, line triple, line quadruple and frame doubling on both PAL and NTSC. Limo Pro's output is progressive. All setting are remembered by adjustment block and it can be switched in or out as required. Limo Pro includes a considerable number of picture tweaks which are user adjustable including sharpness profiles, colour transient improvement, colour saturation and much more. It is standard on all Barco Cine series projectors.
Limo Pro Basic Specs
Q: How do I set-up Limo Pro for best performance?
A: Here's some suggestions to assist with correct Limo Pro calibration, the pdf includes a list of all Limo Pro output modes. If you are interested to know more about Limo Pro contact us for a copy of the Factory technical manual which details exactly how Limo Pro works and how to get the best results.
Limo Pro Calibration
Q: Is the LiMo line multiplier the same as LiMo Pro?
A: Apart from being interchangeable there are no real similarity's between the older LiMo line multiplier and the new LiMo Pro multiplier. LiMo is perfectly useable but LiMo Pro is a more sophisticated design that addresses most of the problems seen with LiMo. The two line multipliers are more or less completely interchangeable, however LiMo Pro may require a main controller software update for it to be correctly recognised by the controller. When replacing LiMo with LiMo Pro it is best to delete all blocks and set to mid point to avoid any errors with block information that is not converted correctly. Only Cine series projectors can access all of LiMo Pro's advanced functions, when *****d to any other model advanced functions are not available.
09-30-2005, 16:26 #3Opprinnelig postet av Rusty
09-30-2005, 16:28 #4
09-30-2005, 17:04 #5
Ser at CurtPalme også har en pdf file om Lido. http://www.curtpalme.com/docs/BarcoLido_Brochure.zipHar ellers intrykk av at det er en del problemer med forstyrrelser i bilde osv med bruk av lido, og regner med at en exstern scaler for 576i signaler osv vil kunne gjøre denne jobben bedre.